But now the capacity of hard drives in the market even has reached TeraByte. Floppy disks have not been used for a long time. Flasdisk storage capacity has also increased considerably, generally the flash is used now size 16 GB. And has emerged another travel storage, which is an external hard drive capacity up to Terabyte units.
Likewise with the development of monitors, both in terms of size to technology, its development is also quite rapid. Formerly the monitor on the PC in the form of tube monitors, dimensions large enough size, enough menuhin place. Now the monitor used has changed into LCD and LED, with dimensions of the size of the thinner and smoother image resolution. But unfortunately, the development of sophisticated technology still can not avoid such hardware from damage.
There are many problems that still can happen to the monitor that we use, because bebagai cause. Starting from the blinking screen, to total death. The constantly flickering monitor will surely be annoying when we are using the computer for something that requires visualization, like typing or playing games.
If you are in need of enlightenment about your monitor that keeps on blinking, on occasion this time dosenIT will explain some causes of blinking monitor.
1. Refresh Rate Too High or Too Low
The refresh rate sets the number of frames displayed in one second. An incorrect refresh rate, either too low or too high will cause the computer to be unstable, to blink. The refresh rate of each monitor screen varies depending on the specification of the monitor itself. For that you have to set the refresh rate so that the display on the monitor is conveniently viewed.
To set the refresh rate you can access it by going to Control Panel menu> Appearance and Personalization> Display> Screen Resolution> Advanced Setting. The display dialog box will appear, click the Monitor tab and then click the Properties option. A refresh rate option will appear that you can use. In general the refresh rate used by the monitor is 60 Hz.
(read also :How to Fix Unmovable Cursors?
2. Screen Resolution Too High
If you replace your PC monitor, or change your computer's operating system, usually the monitor resolution will change / should be changed. Incorrect resolution will make the display screen imperfect, can be too large, cracked, to blink. To adjust the screen resolution of your monitor, lower the screen resolution if the screen resolution is too high to cause the computer to blink.
To set the refresh rate you can access it by going to Control Panel menu> Appearance and Personalization> Display> Screen Resolution and select the appropriate resolution in Resolution option.
3. Unstable Power Supply
Supply of power that goes down will cause the computer is not stable, because the electricity received by the component does not match the required. Sometimes it is too low, sometimes normal, or it may be too high. This may cause the brightness level on the monitor to drop off according to the received power, so the computer looks blinking.
If left this condition can slowly damage the components in the cpu, not just the monitor. For that should try to keep the power received monitor remains stable, you can outsmart by using a stabilizer or UPS.
4. Fan Processor Bemasalah
Fan processor is problematic, such as reduced rotation speed can cause processor cooling process is not running properly. So that the processor becomes hotter faster, this will certainly affect the entire system running on the computer, including on the display on the monitor screen. For that make sure the fan / fan procerrson rotates normally. Clean the dust attached to the fan and heatsink, or replace the fan if it can not be repaired again.
(Read Also: HOW TO OVERCOME THE LAPTOP KEYBOARD NOT WORKING / DISABLED)
5. VGA cable problem
VGA cable is crucial, if the cable is problematic, the data transmission from the CPU to the monitor will be problematic as well. The monitor may blink if the data it receives is also unstable. To find out if your VGA cable is correct or not, you can borrow another VGA cable to test on your monitor.
6. VGA Drivers Need to be Updated
More hardware and switching systems, becoming more sophisticated will require newer drivers to be able to support the latest hardware / operating system you use. For that, if suppose you just change the operating system of your computer that was Windows 8 to Windows 10 for example. VGA driver updates are usually required for VGA to support it.
7. VGA Problems
This is the last problem expected. Problematic VGA will certainly cause the monitor display problem as well. On the PC is usually available VGA add-on, you can use it to mnegecek if true your VGA problem. But for laptops, almost all laptops use VGA built in, or mount directly on the mainboard. For it is quite difficult menceceknya, but as a reference you can read: characteristic VGA characteristics broken.
Similarly the article about the cause of the monitor is blinking. In addition to the seven things that have been mentioned above, a laptop that had fallen can also cause a static charge on the LCD inverter. For mngatasinya you have to disassemble the LCD and menghilngkan charge using magnet. But this should be done by the experts. In addition, you can read the characteristic features of damaged laptop LCD.
Final words, hopefully this article can provide the information you need. If you have any questions, additions or constructive comments, please leave a message, and do not forget to share it if you think this article is useful. That is all and thank you
No comments:
Post a Comment